Seydelmann Second-hand machines
Proven quality. Great price. Ready to use right away.
Discover high-quality second-hand food processing machines - durable, powerful, and retaining their value. These machines have been purchased from our long-standing customers, professionally refurbished, and are ready for your next challenge.
Each machine is inspected by our specialists and serviced (maintenance). Defective and worn parts are replaced during this process. All functions and safety features are tested and repaired if defective. Exterior surfaces and those in contact with the product are finely polished, and the machine is thoroughly cleaned inside and out. A final test run with acceptance testing completes the reconditioning process.
The result: a machine ready for immediate use in proven Seydelmann quality - ready for pickup right after your visit. Our on-site staff will be happy to provide you with further information.
Convince yourself and schedule an appointment.
Key Benefits
- Immediate availability
- Lower investment costs
- Sustainability through durability
- Proven Seydelmann quality
- Tested functionality and safety
Cutters
High-Efficiency Cutter K 40 ras-es - (2011)
Seydelmann High-Efficiency Cutter K 40 Ras-es with 2 speeds for knives and 2 speeds for cutter bowl.
Hygienic design: Construction of the machine body completely made of solid stainless steel, embedded machine covers and doors, polished surfaces, rounded edges, sloping surfaces, harmless plastics and seals in the product and splash zone. There is one handy cleaning opening on the front side of the machine
- 40 litre bowl of stainless steel
- Polished bowl edge
- Water drain screw
- Thermal overload switch-off
- Electric brake
- Panel box built into the machine frame, ready to plug-in
- Main cover of stainless steel
- Noise absorbing cover of transparent special plastic
- Thicker noise absorbing cover 20 mm
- Embedded covers
- Closed machine bottom with ventilation system
- Machine bottom with noise insulation
- Hydrodynamic cutting area in the cover
- Integrated temperature sensor cable
- Cross lever switches with operator's board
- Machine on rolls
- Easy lift for cover
- 3-phase motor IP 55, 12 kW
- Electric: 400 Volts/50 cycles, 3 phases, 13 kW, 26 A
- With immediate stop
- Incl. 5 mtrs. connection cables and plug in CEE 32 A
- Control: Mikro 114 (assembled on the machine) with sequence control
- Incl. 3 knives type B (standard knives) as returned by customer
- Operation manual
Price upon request
Condition of the machine:
Used, inspected, freshly serviced and refurbished. No defects. Fully functional, but with age-related signs of wear, e.g., minor marks, etc.
High-Efficiency Cutter K 120 AC-8 - (2020)
Seydelmann High-Efficiency Cutter K 120 AC-8 with 6 programmable knife speeds, forward, stepless, frequency-controlled, 2 reverse mixing speeds and 2 separate bowl speeds
Hygienic design: Construction of the machine body completely made of solid stainless steel, embedded machine covers and doors, polished surfaces, rounded edges, sloping surfaces, harmless, blue plastics and seals in the product and splash zone.
- With 120 litre bowl of stainless steel
- Polished bowl edge
- Panel box of stainless steel with built-in main-switch, and approx. 10 mtrs. control wiring and motor cables between panel box and machine
- From the very low one up to the highest cutting-speed can be called by means of a knee switch
- Main cover of stainless steel
- Noise absorbing cover, transparent, of special polycarbonate
- Thicker noise absorbing cover 20 mm
- Closed machine bottom with ventilation system
- Machine bottom with noise insulation
- Hydrodynamic cutting area in the cover
- Integrated temperature sensor cable
- Easy lift for cover
- Lifting device for E2 boxes (pneumatic)
- Main motor IP 55, 3 phases, 80 kW, thermal overload switch-off, standstill heating for the motor winding, electric brake
- The drive is without surge (rush of current) and can be overcharged during short period up to 2,0 fold of the rated amperage
- Electric: 400 Volts/50 cycles, 3 phases, 84 kW, 153 A
- Command 1000
- Knife system S24
- incl. cutter knives: 6 x type K as returned by customer
- Operation manual
Price upon request
Condition of the machine:
Used, inspected, freshly serviced and refurbished. No defects. Fully functional, but with age-related signs of wear, e.g., minor marks, etc.
